This allows the machine to restart from a cold state when it powers back up. This allows the fusing unit to cool down and the capacitors inside the machine to loose their charge. Third thing to try is to turn the machine off and unplug the printer from the wall outlet for 30 minutes. Again, other devices can cause power related issues with these printers and 50.2 fuser errors. Next thing is to verify that it’s plugged straight into the wall and not a power strip or battery back up. Sometimes sudden power loss like a brown out or lights flickering can cause this problem. First thing to try is just to turn the machine off and back on. The 50.2 fuser error on the HP laserjet P3015 printer is a fuser warm up error. Troubleshooting Tips for the 50.2 Fuser Error Obviously fusers aren’t the cheapest things in the world so it’s best to try a few things before just throwing in a part you might not need. I’ll talk about why they can happen and several things you can try before replacing the fusing assembly. In this article I’d like to go over the 50.2 fuser error on these machines. But like any other machine fuser errors will happen. I’ve seen several P3o15 machines have over 150,000 prints on them and the fuser is still going strong. So far the HP Laserjet P3015 printers has been a nice relief from the constant problems the P3005 series printers had.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |